WIND X80 Classic Software Guide

WIND X80 Class Wired Hotswap PCB support on VIAL software.No need any firmware.

Download VIAL here:https://get.vial.todayor web page

WIND X80 Bluetooth Hotswap PCB support on LDN Program.

Download LDN program here: https://drive.google.com/drive/folders/1qwZFVxNp4NhV-cCV7RQdEgRyDGwc4C4z?usp=share_link

Bluetooth Pairing/Using for WIND X80 Classic by LDN

1.How to connect bluetooth when first time use?

The bluetooth switch is up to on, down to off. Turn on the switch, make sure the battery well connected to the daughterboard (this step already assembled），and the ribbon cable well connected with pcb,then press FN+F1 you can find "LDN_BLE5_KB_0" bluetooth on your device.
One bluetooth channel should connect one device(do not mix), for example, "LDN_BLE5_KB_0" connect your cellphone , then "LDN_BLE5_KB_1" should connect your computer. There are total 8 bluetooth channel you can connect.
When you plug USB_C cable with the keyboard, then it will use as wired automatically. The bluetooth device "LDN_BLE5_KB_0"can not be found.
LDN program only can keymap on windows,after keymap then it can take effect on Mac.

2.List of shortcuts

FN+TAB=Delete all pairing information Bluetooth(only in bluetooth mode)

FN+F1=Switch to "LDN_BLE5_KB_0" bluetooth channel(only in bluetooth mode)

FN+F2=Switch to to "LDN_BLE5_KB_1" bluetooth channel(only in bluetooth mode)

FN+F3=Switch to to "LDN_BLE5_KB_2" bluetooth channel(only in bluetooth mode)

FN+F4=Enter deep sleep mode(only in bluetooth mode)

FN+Z=Turn on or off light

FN+F5=Open calculator

FN+F6=Open my computer

FN+F7=Open Home Page

FN+F8=Previous song

FN+F9=Next song

FN+F10=Play/Pause

FN+F11=Volume-

FN+F12=Volume+

FN+F13=Mute

3.Why I can not connect bluetooth or find "LDN_BLE5_KB_0"?

(It is better to check the bluetooth by your cellphone first, if the cellphone check the bluetooth is ok, the computer can not connect,then it may matters the computer,the bluetooth adapater.) The bluetooth adapter should be 5.0-5.2

Check the problems step by step:

①Multiple connection channels paired to the same host result in bluetooth error.

Press FN( R_Ctrl) + TAB to delete all pairing information bluetooth, also delete the pairing on your cellphone or computer if connected previous, and then to check if can find "LDN_BLE5_KB_0" on your cellphone. Make sure this two key can trigger first.